Chapter 18, Annex AH CAMP TABLE 2
An alternative to Camp Table 1, this camp table is a combination of the steps in Bench with a Back Rest combined with a variation of the steps in Camp Table 1. Steps to constructing camp table 2:
1.Collect the natural resources, including:
thirty poles approximately 1 m long,
fourteen poles approximately 2 m long,
two poles approximately 3 m long, and
ten poles approximately 0.5 m long.
2.Construct the table by lashing together the four 1-m uprights with two 1-m poles and two 2-m poles.
3.Add twelve 1-m poles as a table top.
4.Lash the two 3-m poles to either end of the table using square lashings.
5.Lash the four 1-m uprights to the end of the 3-m poles using square lashings at each end.
6.Lash eight 2-m long poles to the seat and two 2-m long poles to form the backrest.
7.Lash the five 0.5-m poles to the sides of the table and lash a 1-m long pole to the other end. Repeat on the other side.
8.Then using the 1-m long pole from Step 7., lash two 1-m uprights using square lashings. Repeat on the other side.
9.Finish the end seats by lashing the final 1-m long pole to the top to form a backrest. Repeat on the other side.
This elaborate camp craft can take many hours to build, a lot of personnel and resources are required.
Report a problem or mistake on this page
- Date modified: